Gate spring how does it work

Posted By: Editor at Ironmongery Experts. Materials: Drill Gate spring Rivets Screws Instructions: Attaching the gate spring to the hinge Whenever installing a gate spring, you always need to attach the spring to the hinge of your wooden gate whilst also ensuring that the adjustment knob is positioned on the top of the spring before you fit it. Attaching the gate spring to the fence post Place the bottom of the gate spring against the fence post and make sure the brackets are even.

Adjust the tension of the spring You now need to adjust the tension of the spring, which can be a trial and error process. Leave a Reply Name. Leave a comment. Recent Posts. How to install handrail brackets How to secure garage doors What are lift off hinges?

Door knob types: a guide to doorknobs What is ironmongery? Meet the Family Assisting customers since About Us. Custom Cut Keys In house workshop for express orders View range. In most cases, you install gate springs without tension. Once they are in place, you need to locate the tension device. Typically, it is in the top of the springs. Insert the tension rod that came with the assembly kit and turn it clockwise to tighten the springs.

Place a peg from the assembly kit into one of the holes near the mounting bracket and remove the tension rod. Open and close the gate. If the gate needs more tension, repeat the process. If the spring is too tight, insert the rod, remove the peg and turn the rod counterclockwise a partial turn, before resetting the peg. Denise Brown is an education professional who wanted to try something different.

Two years and more than articles later, she's enjoying her freelance writing experience for online resources such as Work. Brown holds a master's degree in history education from Truman State University. By Denise Brown. Related Articles. Make marks through the gate spring's mounting holes on both the gate and the gate post. Drill pilot holes through the gate and gate post on the spots you marked.

Attach the gate spring to the gate and gate post using the screws in the assembly kit. If you are attaching the gate spring to a metal gate use self-tapping metal screws of a similar length to those in the kit.

Attach the gate spring to masonry by drilling holes in the masonry and using anchors for the screws. Set an adjustable wrench on the torque adjustment on top of the gate spring. Some models provide a metal bar that you insert into a specified opening on the top of the gate spring. Rotate the wrench or bar to the right to put torque on the spring.